截止閥標準匯總

時間：2008/7/31 來源：三精閥門瀏覽數：7063

截止閥標準匯總

標準編號	標準中文名稱	標準英文名稱
DL/T531-1994(2005復審)	電站高溫高壓截止閥、閘閥技術條件
GB/T11689-1989	船用法蘭鑄鋼截止閥(四進位)	Marine cast steel flanged stop valves
GB/T12235-1989	通用閥門法蘭連接鋼制截止閥和升降式止回閥	General purpose industrial valves—Flanged steel globe valves and lift check valves
GB/T12233-1989	通用閥門鐵制截止閥與升降式止回閥	General purpose industrial valves—Casting iron globe valves and lift check valves
GB/T1951-1984	船用低壓外螺紋青銅截止閥	Marine low pressure bronze male threaded stop valves
GB/T2499-1993	船用法蘭鑄鐵雙排截止閥箱	Marine cast iron flange dual-row stop valves-case
GB/T590-1993	船用法蘭鑄鐵截止閥	Marine cast iron flanged stop valves
GB/T594-1983	船用外螺紋鍛鋼截止閥	Marine forged steel male thread stop valves
GB/T584-1999	船用法蘭鑄鋼截止閥	Marine cast steel flanged stop valves
GB/T595-1983	船用外螺紋青銅截止閥	Marine bronze male thread stop valves
GB/T587-1993	船用法蘭青銅截止閥	Marine bronze flanged stop valves
JB/T7245-1994	制冷裝置用截止閥
JB/T7747-1995	針形截止閥
JB/T9081-1999	空氣分離設備用低溫截止閥和節流閥技術條件
JB/T53165-1999	高壓平衡截止閥產品質量分等
JB/T53174-1999	截止閥產品質量分等
JB/T53155-1999	空氣分離設備用低溫截止閥和節流閥產品質量分等
JB/T8859-2004	截止閥靜壓壽命試驗規程
HG/T3215-1986	聚三氟氯乙烯塑料襯里截止閥
NF E29-350-2003	工業用閥.鋼制球閥、球狀截止閥和止回閥	(Industrial valves - Steel globe and globe stop and check valves.)
NF P43-001-2000	建筑物用閥門.建筑物中供應引用水用銅合金截止閥.試驗和要求	(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.)
NF D36-380-2001	燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統	(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.)
NF A84-621-2002	氣焊設備.焊接、切割和相關工藝用帶截止閥的速動連接	(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.)
NF M88-771-1975	液化烴容器裝置.手動截止閥.制造.功能.試驗	(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.)
NF P43-002-1981	建筑物水管閥門.水表截止閥.一般技術規范	(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.)

BS EN 13709-2003	工業用閥.鋼制球閥、球狀截止閥和止回閥	(Industrial valves - Steel globe and globe stop and check valves)
BS 1552-1995	一類、二類和三類燃氣用手動截止閥規范	(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar)
BS 7461-1991	帶有流量調節器、閉路開關指示、閉合位置指示器開關或氣流量控制的電動自動氣體截止閥規范	(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control)
BS 1010-2-1973	給排水設施用排放旋塞和截止(旋壓式)閥規范.第2部分:排放旋塞和地面上用截止閥	(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves)
BS 1873-1975	石油、石油化學及有關工業用鋼球形閥、球形截止閥與單向閥(有法蘭及對接焊端)規范	(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries)
BS 3457-1973	水龍頭與截止閥座墊圈材料規范	(Specification for materials for water tap and stopvalve seat washers)
DIN 4817-1-1981	液態氣的截止閥.概念.安全技術要求.檢驗.標志	(Shut off valves for liquefied gases; definitions, requirement, testing, marking)
DIN 86251-1998	造船用鑄鐵制帶法蘭的DN15至500的截止閥	(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500)
DIN 86260-1998	造船用炮銅制帶法蘭DN15至500的截止閥	(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500)
DIN 85003-4-1997	造船用管件的交貨技術條件.第4部分:截止閥	(Technical specifications for valves for shipboard use - Part 4: Stop valves)
DIN 85003-6-1997	造船用管件的交貨技術條件.第6部分:手動截止閥	(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves)
DIN 3399-1986	低壓截止閥.安全技術要求和檢驗	(Gas low-pressure cut-off valves; safety requirements, testing)
DIN 3160-1974	公稱壓力25的冷卻劑循環直通截止閥	(Through-valves for refrigerant circuits, nominal pressure 25 bar)
DIN 3161-1974	公稱壓力25的冷卻劑循環角形截止閥	(Elbow valves for refrigerant circuits; nominal pressure 25 bar)
DIN 4056-1992	水管.街道地下截止閥門的路蓋.DVGW技術規范	(Water pipelines; valve boxes for stop valves; DVGW code of practice)
DIN EN 1643-2001	燃氣燃燒器和燃氣用具用自動截止閥的閥門檢驗系統	(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000)
DIN 86500-1968	船用螺紋連接的截止閥和閘閥等概述	(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding)
DIN 86254-2000	船只及造船技術.超輕型截止閥DN32-DN125(PN10)	(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10)
DIN EN 13709-2003	工業用閥.鋼制球閥、球狀截止閥和止回閥	(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)
DIN EN 1213-1999	建筑閥門.建筑物中飲用水供應用銅合金截止閥.試驗和要求	(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999)
DIN 86266-2002	船舶和航海技術.用手夾緊和法蘭連接的超輕型法蘭的截止閥	(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10)
GB/T1856-1993	船用法蘭鑄鐵單排排出截止閥箱	Marine flanged cast iron single arrangement exhaust stop box valve
GB/T1854-1993	船用法蘭鑄鐵單排吸入截止閥箱	Marine flanged cast iron single arrangement suction stop box valve
JIS B8605-2002	致冷裝置的截止閥	(Stop valves for refrigerants)
JIS F7379-1996	造船.卡套式30K黃銅截止閥	(Shipbuilding -- Brass 30K stop valves with bite joint(s))

JIS E4103-1988	鐵路車輛用截止閥	(Cut-out cocks for railway rolling stock)
JIS E4114-1989	鐵路車輛用青銅截止閥	(Bronze stop valves for railway rolling stock)
QB/T3880-1999	衛生潔具、暖氣直角式截止閥技術條件	Technical requirements for sanitariness ware and heating angle valve
QB/T3881-1999	衛生潔具、暖氣直角式截止閥型式和尺寸	Shapes and dimensions of sanitariness ware and heating angle valve
JB/T10530-2005	氧氣用截止閥